|
Footy Kits
Across the globe there are numerous differing types of Footy all conforming to the box rules, here are a selection of kits which we know are currently available. Please be aware they may not necessarily be available in your country and there is no obligation upon the part of Kit manufactureres to export kits across national boundaries.
To link to the Kit Makers information click on the Picture
To link to the Kit Makers information click on the Picture
1299
|
The designer Peter J Henderson says
"A professionally made PETG: vacuum formed hull, deck and moulded R/X and controls hatch, has advantages over using epoxy, polyester or wood. Centrifugal cast ballast ready slotted with central re-enforcement, laser cut aluminium rudder and fin are ready for finishing and assembly. Taking care of the main hull construction for an easier perfect and watertight build. Instructions with pictures for every stage have been carefully written to aid the completion of a competitive racing Footy and a set of sails (ready made to order if required) proven in all weather sailing and capable of utilising an inexpensive 2.4gig radio control."
|
Gospectre 507
|
Designed to be easily and accurately assembled the 507 footy has a plug together hull and deck. The deck has molded areas to cut out so you can select to use standard or micro servos, it also incorporates the structure of the boat including self draining battery and radio control box. Deck and hull sandwich the combination mast and keel box for accurate alignment ensuring 507s are all the same for ”one-design” racing.
|
Poolshark
|
Pool Shark is available in both "Full" and "Short" Kit configurations. The "Full" Pool Shark Kit consists of everything you will need to build a competitive `race-ready' Footy, less radio gear, tools, adhesives and paint. The "Short" Kit does not contain sails or rigging. Both the "Short" and "Full" Kits contain many pre-fabricated parts to make assembly simple and fast. No power tools are required for assembly.
|
Blackstar 12.5
|
All new for 2012 my 12.5 Footy New design made for all around great sailing in all wind conditions. This boat can use regular servos or micro servos. This latest boat was designed to be very competitive and not go on it's nose on a run!!!
|
Victor 12-A
|
The kit is designed for simple construction which includes a molded Hi-Impact styrene hull, plywood deck, aluminum spars, finished sails, molded lead keel bulb and select wood parts.
|
Opalek
|
FOOTY class was created a few years ago in New Zealand, but now rapidly expanding around the world. Opalek is its main representative in Poland and the Czech Republic. The third International Championships in the class were held in Wroclaw (who is also the Polish capital of the smallest in the world-class racing yachts) in 2010. All over the world have been built more than 200 boats made from kit sold. Our country is now officially registered are about 50
|
Half Pint Too
|
Breaking Wind Boats
"Bill Hagerup and I are at it again. He sailed his new boat Halfpint Too to a second place finish in the Region 1 Championships on August 13th 2011." Halfpint Too is ready and in production ! Hull is done in .030" 33g Deck is done in .020" 13g ( weights are for untrimmed parts with a bit of flashing attached)
|
